Car windscreens are not merely decorative components. They play a vital role in maintaining the structural integrity of the car. They protect one from flying debris and strong winds. Also, they offer protection in the event of a car collision.
So, in case the windscreen is chipped, cracked, or broken, it is vital to do either car window repair or replacement, especially to be carried out by professional mechanics.
Learning how to maintain the windscreen after it is repaired or replaced is the first step to maintain one’s investment. For keeping the newly repaired or replaced windscreen in good condition, one can adhere to the following tips:
For the first hour after procedure
The first few hours following windscreen repair or replacement are crucial. The windscreen can be protected by the following tips:
- Wait before driving the vehicle
Repair of windscreen involves the application of an adhesive like urethane which keeps the glass in place and makes a waterproof and strong seal around the chips or cracks. It is vital to provide the adhesive with sufficient time for setting and drying. For best results, it is advised that one should wait to drive the car at least one hour after the procedure. One will be reminded by technicians about this. Also, when one enters the car, keep a lookout for any shards of glass remaining after the procedure.
After 24-48 hours
There are some precautions to take in the 24 to 48 hours after repair or replacement:
- Clear inside and outside of the car
One would not want anything to push against the screen while the adhesive is drying. In the first few hours after the procedure, avoid covering the windscreen with any material. Also, avoid keeping sunshade inside the windscreen and remove any clutter from the dashboard.
- Leave window open
Even as it dries, the seal around the car glass can be subject to extra pressure. For preventing any leaks caused by such pressure, keep a window rolled down by a minimum of an inch. This must be done the first day after the procedure.
- Retain retention tape
Professionals of car glass repair mostly use retention tape to hold together windscreen mouldings in good condition. It is used to protect the seal from the elements while it is drying. Though it may look ugly, the retention tape must be retained at least for the first day after the procedure.
- Avoid power washers
One must avoid power washers and other strong car washers to ensure that new mouldings do not get damaged or shift prior to their setting completely. If one is adamant about washing the car, do it manually, using some detergent and a rag of cloth.
- Go easy
For retaining repaired or replaced windscreen in good condition, take care not to slam car doors as they can cause stress to the adhesive that is drying. Also, avoid driving on roads with potholes and bumps for the same reason.
- Keep windows clean
Get rid of debris and smudges on the windscreen obstructing your vision by using a good quality auto-glass cleaner. Also, clean the glass from dead bugs, which can damage the glass by its acidic entrails.
- Keep clear of scratches
Damaged windscreen wipers can cause scratches to the glass. So, if one notices such damage, it is time to remove such wipers.
- Drive carefully
While driving through traffic, keep a generous distance from other vehicles in front to avoid being impacted by flying debris.
In sum, these are some tips to maintain a car aftercar window repairor replacement.