The maintenance of your garage door is an underrated subject because people usually take their garage doors for granted. But the garage door requires yearly inspection and maintenance to remain functional.
People who overlook the needs of their garage doors find themselves looking for garage door repair. But, one can save the hassle of paying expensive repair costs simply by following a proper maintenance protocol.
To stay on schedule, you can set a time for your garage door inspection and maintenance with varying seasons. To help you draft a garage door maintenance schedule, we have compiled a comprehensive guide ahead. Keep reading till the end.
Observe Your Garage Door, Listen To It
If there is an issue with your garage door or its opener, it will produce unpleasant scraping noises and will present toppling movement.
However, those homeowners who properly maintain their garage door enjoy a quiet, noise-free, door operation. It is important you listen to sounds your door makes when it is opened and closed. Pay close attention to the springs, cables, and pulley, make sure they are aligned.
Clean The Garage Door Tracks
Observe the tracks of your garage door from both sides and see if any dirt is accumulated there or not. Take the help of a leveling device to see that the tracks are in perfect position and alignment (vertical alignment).
You can assess the need for basic repairs on your own but extensive issues will require you to hire a garage door expert.
Make Sure The Hardware Is Tight
A conventional garage door is pulled vertically up and down multiple times every year. This constant operation and vibration among the moving parts can damage the hardware springs and screws.
Inspect the brackets that are holding the tracks in place to the wall. If these brackets are loose, take a wrench and tighten them up so that your garage door operates smoothly without any resistance.
Install New Rollers
The rollers play a crucial role in the smooth operation of your garage door. Inspect the health of these rollers at least once every year and replace them after every five years of use.
If you see any trouble with the rollers such as unpleasant sounds, or grinding noises, or if they appear chipped, then remove the brackets and replace the rollers.
Assess The Condition Of The Pulleys
Check the condition of your garage door’s cables and pulleys that are connected to the door’s brackets. The pulleys hold the springs and the door in place when it is lifted or lowered back.
Make Sure The Hardware Is Lubricated
It is imperative that you properly lubricate all the hardware in your garage door to reduce friction and increase the lifespan of your garage door. Apply this lubrication such as the lithium grease at least once or twice each year on all the moving parts especially the roller and springs.
Check The Balance Of Your Door
If you are using a garage door that is not properly balanced, the opener will have to bear a larger load than usual decreasing the functionality of the garage door. Your garage door needs to be properly balanced in a way that requires minimal force to lift it.
You can test the balance by manually opening the door about halfway. If the door remains in place without any effort, it is well balanced. But, if the door does not hold its place, replace the springs. Hire a professional garage door repair Sacramento CA company to do it to make sure everything goes smoothly.
Wipe Off The Dust & Apply A Fresh Coat Of Paint
While you are assessing the condition of the hardware, check the overall condition of the door as well. If you are using a steel-made door, see the condition of the steel, it should not be rusted in any area. Apply a primer if necessary and then paint it new.
However, the good-quality fiberglass doors can be cleaned using any cleaning liquids. The wooden doors need the most attention, check for termite infestation and the wood quality.
Get rid of the old, rotten, and chipped-off paint by using sandpaper, and then apply a fresh coat of paint on the entire door.