Many people would ask how to set up Netgear WiFi extender successfully, especially people who are new in this business. Netgear is one of the best brands when it comes to providing the best products that come with the convenience of wireless connection. The brand is also known to provide a fast internet connection for their consumers. For some people, these two features alone are enough to make them buy their brand and start using it, but this does not always happen.
There are actually common issues that many Netgear extender users face. They are not able to fully enjoy the service provided by their brand, and this is where their experience ends. There are some common problems that usually occur after users have installed the system. This article will be showing you some of the common issues that may occur. Reading this will help you avoid them and even fix them if they occur.
The first problem is caused by poor installation. If you want to know how to setup wifi extender, You must make sure that you get an extender with same range as your current router. If you already have an older one, you should purchase a new one so you can be sure that your new device would work well with your old router. Otherwise, this issue will surely occur.
Another common issue is related to the default username of your Netgear router. It is important that you change the username of your extender since most of the times users change it automatically when they connect to the internet. Find out how to set the username and use different accounts.
The third problem occurs if you setup Netgear wifi extender with the wrong ssid. Your device driver needs to identify the SSID of your network card to properly connect to it. Without this ssid, the network card will not able to connect to the Netgear router. So, if you have configured everything correctly, and your internet connection works perfectly, then there might be only one thing that's not working. Your IP address.
Fixing this issue is very easy. All you need is to update your Netgear_ext driver. And you can update it through automatic driver updating tool such as:
So, how to set up Netgear wifi extender? When you have already installed the software on your existing router, then plug the extender into the USB port of your router. Wait for a few minutes. Then click on the Wireless Connection Status in your web browser. In case you haven't set up your existing router, then this step won't be necessary.
The last step is to locate your usb cable. You can find it under your modem, usually at the back of the device, or it may be behind the motherboard. Simply search for "modelid" or "productid". You can plug in your ethernet cable, wait for a few minutes, and then plug in the USB wireless extender. Setup your new wireless device, and enjoy a smooth Internet experience!
Now, if your router doesn't already have an ethernet port, or your existing device requires an ethernet port to work, you have two options: plug in an ethernet cable into a wall socket, or plug in a molex cable into the wall socket. Usually, you would plug in the molesocket cable into the back of the Netgear WLAN router. Again, this step isn't necessary if you have an existing device with an ethernet port. If you do have an ethernet port, then you can easily determine which outlet goes where in your house.
If your existing router doesn't have an outlet, or the outlet is not accessible, you can always purchase an ethernet extender to use with your existing router. There are many different types of extenders to choose from, including those that have built-in lithium battery packs, LED lights, wireless earbuds, etc. If you have a laptop or tablet with an active receiver (i.e. android phones, pda's, ipods), and you want to keep the device connected to the internet, then you need to purchase an ethernet wireless router to connect it to your modem. Once the router is installed, you will need to plug the led light in as well.
If your mobile device doesn't have an outlet, then you will have to plug the extender into an electrical outlet. To determine what kind of outlet to plug the extender into, you have to look at the power outlet on your mobile device. You want to make sure that you plug the extender into a solid electrical outlet that can handle the weight of the extender. If you have a wall socket in the house, then you can just plug the extender into the wall socket. If you don't, then you will have to look into getting an additional outlet that has enough weight so that the extender doesn't come out of the wall and go crashing down through the floor!
Finally, when you have successfully plugged the extender into the electrical outlet, you will have to turn the power LED light on. This is to make sure that the device is powered on. If you don't turn the power LED light on, then the device will not be powered on. Once you have done all of these things, then you will be ready to set up your Netgear WiFi Extender !