Viscaria Drillings - VDD0201 returns 15m @ 0.73% Cu and 6m @ 1.45% Cu outside the Mineral Resource Boundary
Kiruna October 18, 2019
Copperstone is pleased to announce that the assay results of VDD0201 and VDD0202 have been received from ALS laboratories and compiled by Copperstone, verified by the QP.
- The phase 1 on A zone shallow drilling has been successfully completed.
- VDD0201, drilled outside of the mineral resource boundary, intersected significant copper mineralisation in the A main zone and the footwall lode, respectively email@example.com%Cu from 40m and firstname.lastname@example.org%Cu from 103m downhole depth (65m vertically below surface).
- VDD0202 intersected email@example.com%Cu from 27m downhole depth, including 3m at 1.85% Cu. This intercept fits very well with the A zone resources wireframe.
- VDD0203 and VDD0204 assaying pending.
- D zone deep exploration started with VDD0205 planned depth 1,000m.
Copperstone’s first drill campaign on the Viscaria property commenced on September 17, 2019, and confirmed the veracity of the historic shallow copper deposit and intersected significant copper mineralisation at the footwall lode. VDD0201 was drilled for four days and stopped as planned at 150m. VDD0202 was drilled for three days and stopped as planned at 70m.
VDD0201 is drilled from the hanging wall to the footwall of the A zone mineralisation, outside the boundary of the current Mineral Resource, i e potentially adding mineralised tonnage. Copperstone intersected two significant shallow mineralizations, previously not included in the resource wireframe:
- The A main zone: Copperstone intersected a broad mineralisation of firstname.lastname@example.org%Cu from 40m downhole, included two continuous mineralisation zones:
- The A footwall lode: Intersected email@example.com%Cu from 103m downhole depth.
·VDD0202 is drilled to test the veracity of the historic drill assay. The hole intersected firstname.lastname@example.org%Cu from 27m, including 3m at 1.85% Cu from 41m downhole.This intercept fit very well with the A zone mineralisation wireframe. In this section, Copperstone has evidence of the footwall lode by D-3167 which intersected email@example.com%Cu from 87m.
“The success of this first drilling campaign at A zone give us high confidence to plan a strategic low risk activity. We will immediately move forward to the next step by planning shallow drilling, to follow up the significant hanging wall and footwall lodes. This data will be valuable to reinterpret and re estimate the A zone shallow resources, prior to the feasibility studies. We are confident that the resources will significantly improve.”, comments Maurice Zongo, Project Geologist.
“The first lab assay results from A zone drilling are very encouraging. It confirms both that the historical drilling assay data is reliable, and that the shallow mineralisation at A zone does indeed exist and can be increased. We are already planning for the next shallow drill campaign. This while the awaiting the assays from VDD0203 and VDD0204. Meanwhile, the D-zone drillings could be approaching its exploration target.”, comments CEO Michael Mattsson.
Please see attached pdf for the complete information.
For further information, please contact Michael Mattsson (CEO) at +46(0)580-88890, or firstname.lastname@example.org or refer to Copperstone webpage: www.copperstone.se.
This press release contains insider information which Copperstone Resources AB (publ) is obliged to publish according to the EU market abuse regulation (MAR). The information was delivered by the above-mentioned contact for publishing October 18, 2019 at 17:12 CET.
Copperstone is a public company trading as COPP B on Nasdaq First North Growth Market in Stockholm, Sweden. The Certified Adviser is Augment Partners AB, email@example.com, +46 8 505 65 172. The Company is focused on base and precious metal exploration in the vicinity of the internationally recognized mining districts of Kiruna and the Skellefte-field in northern Sweden. In addition, the Company also owns an exploitation concession in the Bergslagen mining region, in central Sweden.
The technical information herein has been reviewed by the Qualified Person of the Company (QP) Thomas Lindholm M. Sc., GeoVista AB, Luleå.
Forward looking statements
The information in this press release may contain forward-looking statements, which relate to future events or future performance and reflect Copperstone’s current expectations and assumptions. Such forward-looking statements reflect Copperstone’s current beliefs and are based on assumptions made by and information currently available to the Company.
Investors are cautioned that these forward-looking statements are neither promises nor guarantees, and are subject to risks and uncertainties that may cause future results to differ materially from those expected.
These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances.
Please note drill intercepts are quoted as drilled and are not corrected for true thickness as the shape of the orebodies is not yet known.
© 2019 GlobeNewswire, Inc. All Rights Reserved.