Netgear C3700 DOCSIS 3.0 Modem Router: Everything You Need To Know
Are you looking for an affordable way to extend your existing WiFi network? If yes, then Netgear C3700 N600 WiFi DOCSIS 3.0 cable modem router would certainly be your best bet.
This smart WiFi router provides better WiFi connectivity throughout your home for all your WiFi-enabled devices. Let's have a look at the amazing features of C3700 router:
Fast dual-band WiFi Speeds—N600 WiFi up to 600Mbps.
The next-generation DOCSIS 3.0 technology is 8x faster than DOCSIS 2.0.
Cable internet speeds up to 340 Mbps.
8 downstream and 4 upstream channels.
Gigabit Ethernet Ports for faster-wired connections.
A USB port to share your hard drive wirelessly.
In order to avail such features of the smart device, it is crucial to cable your Netgear C3700 DOCSIS 3.0 modem router to a gateway/router. Let's hit the nail on the head.
Cable Your Modem Router to a Router or Gateway
To get the job done, you must access the Netgear router login page so that you can manage, view, and change its settings. Changing the router's settings might prevent certain network conflicts that can occur when two or more devices on the same network perform routing functions.
To cable your Netgear modem router to a gateway or router:
Use a coaxial cable to connect the cable port on the modem router to a wall outlet.
Once done, connect the power adapter to your Netgear modem router and plug the power adapter into a working electrical outlet. Push the Power (On/Off) button on the rear panel on your Netgear modem router.
The Power LED will light up.
On your computer, laptop or wireless device, find and select the router's WiFi network.
Enter the default WiFi password.
Launch a web browser and type routerlogin.net or Netgear router IP address.
The router loginscreen displays.
Enter your Netgear modem router username and password.
The BASIC Home screen will appear.
Select the ADVANCED option.
Now, click on Administration > Router Mode > No radio button.
Click on the Apply button.
Follow the instructions given on Netgear router manual to cable your device to the modem router.
Once you've cabled your Netgear device successfully, connect it to your home network using the demystify steps given below:
You can connect your Netgear C3700 N600 WiFi DOCSIS 3.0 cable modem router in two ways:
Wired Connection.
WiFi Connection.
Wired Connection
1. Plugin your modem router and make sure that the power light on it is stable.
2. Then, connect a device to the modem router using an Ethernet cable.3. Turn on a computer or laptop.4. A message will display on your computer screen “Ethernet cable is connected”.
Before following the above-mentioned steps, you have to make sure that the Ethernet cable you are using isn't loose or dusty.
WiFi Connection
You can connect to your modem router’s WiFi network with WiFi Protected Setup (WPS) or find and select the WiFi network (SSID).
To use WPS to connect to the WiFi network, do the following:
Make sure that your Netgear C3700 DOCSIS 3.0 modem router is properly plugged into a working wall outlet and the power LED on it is lit.
Push the WPS button on your Netgear modem router.
Wait for a few minutes. Push the WPS button on your computer or WiFi device.
Your device connects to the WiFi network successfully.
How to find and select the WiFi network?
Make sure that your Netgear device is receiving the proper power supply.
On one of your devices, find and select the router's WiFi network.
Join the WiFi network.
Enter the Netgear router password.
Thus, your router connects to the WiFi network.
On the off chance, if you face encounter issues while cabling or connecting your C3700 N600 (8x4) WiFi DOCSIS 3.0, feel free to ask our technical executives for Netgear router troubleshooting tips.
