A Detailed Guide to Fix WiFi Keeps Dropping in Windows PC

WiFi has made it a lot easier for everyone to enjoy streaming videos and movies on any device without messing with the clutter of cables and wires. But, what if your WiFi keeps dropping continuously. Alas! So frustrating! Don't worry – it is possible to fix this annoying issue.

Below are the possible fixes through which you can troubleshoot the WiFi connection keeps on dropping issue When you login to router. Continue reading!

FixWiFi dropping issue:

1. Change the Power Management Settings.

2. Reset the WiFi AutoConfig Service.

3. Update the Network Adapter Driver.

Change the Power Management Settings

1. On the bottom-right comer of your PC's home screen, right-click on the WiFi icon.

2. Click on “Open Network and Sharing Center”.

3. Then, select the option “Change Adapter Settings” and right-click on your WiFi adapter.

4. Once done, click on “Properties”.

5. Click on the “Configure” button > navigate to the “Power Management” tab > untick the box “Allow the computer to turn off this device to save power”, and finally click on the “OK” button.

Try the above-mentioned troubleshooting steps to fix the WiFi dropping connection issue.

Reset the WiFi AutoConfig Service

1. Hit the Windows + R key on your keyboard.

2. A “Run” pop-up will appear.

3. Enter service.msc and click on the OK button.

4. Search “WLAN AutoConfig” from the displayed pop-up and double-click on it.

5. In the next step, you are supposed to change the Startup type. It should be set to “Automatic”.

6. Click on “Apply” and at last, select the “OK” button to save the settings.

Now, see whether your WiFi connection is back to normal or not. If still the WiFi network not showing up, proceed towards the next step to fix the issue.

Update the Network Adapter Driver

If the above-mentioned troubleshooting steps don't fix the WiFi connection problems for you, then it is quite possible that you are using a corrupted or wrong network driver. To fix the issue, update the wireless network driver.

Well, there are two easy ways through which you can update the wireless network adapter to the latest version.

1. Manually.

2. Automatically.

Manually Updating the Network Driver

You can easily update your network driver manually by visiting the manufacture's website. After that, in the search box, enter the device manager and select the Device Manager option.

1. Then, select a category to see the names of available devices.

2. Right-click on the one you’d like to update.

3. Select “Search automatically” to update the driver software.

4. Finally, select the Update Driver and the network driver will be updated manually.

In case of any assistance, reach out to our technical department.

Automatically Updating the Network Driver

If you don’t have enough time, patience, or computer skills to update the wireless network adapter drivers manually, you can put it on auto mode to update the network's driver automatically.

Well, the network driver will automatically recognize your system and easily find the correct drivers for your exact video card, monitor, and your variant of Windows 10. It will update, download and install the latest version of the network driver.

After following the above-mentioned steps, the WiFi keeps droppingissuewill be fixed. If you don’t experience any improvement in your WiFi connection, you may have a hardware issue. In that case, it’s a good idea to contact a proficient tech support team for instant help.

Hopefully, you will be able to fix the WiFi connection problems after reading this post. If you have any question(s) or suggestion(s) on the same, you’re more than welcome to leave us a comment.

Thanks for reading!

The Views and Opinions expressed in this article are the author's own and do not necessarily reflect those of this Web-Site or its agents, affiliates, officers, directors, staff, or contractors.